EDA Design Page 100

FloEFD 13 for Creo CFD embedded in Creo Parametric and Wildfire FloEFD for Creo is a fluid flow and heat transfer analysis software that is fully embedded in Creo Parametric and Wildfire and is based on proven computational fluid dynamics (CFD) technology. Unlike other CFD software, FloEFD for Creo works directly with native Creo Parametric and Wildfire geometry in order to keep pace with on-going design changes. Because you are using the same geometry for CAD and analysis, FloEFD for Creo allows you to maintain a single set of data across your project design process.product:Mentor.Graphics.FloEFD.v13.0.2518 Lanaguage:english Platform:WIN32&WIN64 Size:1DVD

Cadence Assembly Design Work Benchproduct:Cadence.ADW.v16.60.015 Lanaguage:english Platform:Linux Size:1DVD

Engineering change orders (ECOs) have a wide variety of implementations that range from adding or removing logic in a design to more subtle changes such as cleaning up routing for signal integrity. All ECOs are focused on delivering products to market as fast as possible with minimal risk to correctness and schedule. ECOs can be a time of high stress, long work hours, and uncertainty. Even if the logic change is implemented in the netlist, there might not be enough spare gates on the mask to implement the change. Benefits Provides faster turnaround time by minimizing manual intervention and eliminating time-consuming iterations Generates early estimates on ECO feasibility by quantifying designer intent Implements complex ECOs that are typically not attempted...

These new features include: Dynamic Parameter Estimation & Tuning – DPET GOST short-circuit – R 52735 standard New Web consoles for monitoring and predictive simulation Customizable Web console templates Native SCADA communications protocols Waveform capturing and synchophaser measurements New library merge and cable library quick-pick Enhanced analysis modules 3,500+ new device libraries Multi-language edition “ETAP 12.5 is the next logical step in our quest to deliver the most robust technologies to optimize and automate power system design while increasing the safety, quality, and productivity for which our products are known for around the world,” said Shervin Shokooh, Chief Operating Officer of ETAP. For example, prior to the availability of Dynamic Parameter and Estimation Tuning (DPET), users had to manually tune...

Mentor Graphics was the first to combine single kernel simulator (SKS) technology with a unified debug environment for Verilog, VHDL, and SystemC. The combination of industry-leading, native SKS performance with the best integrated debug and analysis environment make ModelSim® the simulator of choice for both ASIC and FPGA designs. The best standards and platform support in the industry make it easy to adopt in the majority of process and tool flows.Overview Unified mixed language simulation engine for ease of use and performance Native support of Verilog, SystemVerilog for design, VHDL, and SystemC for effective verification of sophisticated design environments Fast time-to-debug, easy to use, multi-language debug environment Advanced code coverage and analysis tools for fast time to coverage closure Interactive...

Cadence® Encounter® Digital Implementation (EDI) System provides the most effective methodology to maximize performance, and minimize area and power for high-performance, 100M+ instance and power-efficient designs. Integration with the Virtuoso® custom design environment ensures seamless data transfer and increases productivity for mixed-signal designs. EDI System also supports advanced 20/22nm and 14/16nm FinFET process technologies and system-in-package/3D-IC design. With these capabilities, EDI System delivers the most comprehensive and deterministic solution for physical implementation of today’s most demanding SoCs. BenefitsPredictability and convergence Provides full-chip implementation in a single environment Enables design exploration, fast and accurate chip feasibility analysis, including automated floorplan synthesis and ranking, as well as hierarchical budgeting and planning for convergent hierarchical implementation results GigaOpt throughout the flow and natively...

Computer modelling is a fast and inexpensive way to investigate and solve EMC/EMI problems that occur in electrical/electronic systems. EMCoS provides number of convenient EM simulation tools. Included: – EMC Studio 7.0Find solution of wide range of EMC problems making simulations in EMC Studio. EMC Studio provides convenient user interfaces for simulations of complicated EMC problems. Model can vary from simple test set-up to complicated real-life environment. – EMCoS Antenna VirtualLab 1.0EMCoS Antenna VLab is powerful simulation software especially suited for antenna calculations. A powerful CAD interface gives you manifold possibilities to design even very complex antennas in short time. Powerful simulation cores based on the Method of Moments, optimized for sequential and parallel computations, deliver accurate results. – EMCoS...

FEKO is a comprehensive electromagnetic simulation software tool, based on state of the art computational electromagnetics (CEM) techniques. It enables users to solve a wide range of electromagnetic problems. The multiple solution techniques available within FEKO make it applicable to a wide range of problems for a large array of industries. Typical applications include: Antennas: analysis of horns, microstrip patches, wire antennas, reflector antennas, conformal antennas, broadband antennas, arrays Antenna placement: analysis of antenna radiation patterns, radiation hazard zones, etc. with an antenna placed on a large structure, e.g. ship, aircraft, armoured car EMC: analysis of diverse EMC problems including shielding effectiveness of an enclosure, cable coupling analysis in complex environments, e.g. wiring in a car, radiation hazard analysis Bio-electromagnetics:...

Designing a product requires more than a simple high PCB you need PCB design software tightly integrated. Expedition Enterprise provides this high level of integration, enabling all team members to work collaboratively and more efficiently.Sophisticated systems design companies today seek to find areas in which to maximize product differentiation and profitability. With the right tools, these strategic advantages can be achieved in the process of PCB design. Mentor Graphics Expedition Enterprise design flow is the most innovative PCB industry, providing an integration of the definition of the design of manufacturing execution system. Its unique and patented technologies can reduce design cycles by 50% or more, while significantly improving the overall quality and efficiency of resourcesProduct:Mentor Graphics Expedition Enterprise Flow(EE) v7.9.5...

What’s NewDevice Support• Support enabled for Zynq™-7000 7Z100 device• The following devices are production ready°Virtex®-7– 7VX690T, 7VX330T, 7VX415T, and 7VX980T°Zynq-7000– 7Z030 and 7Z045°Defense-Grade Kintex™-7Q– 7K325Tand 7K410T°Defense-Grade Virtex-7Q– 7V585T and 7VS485TImportant InformationISE® Design Suite 14.5 has moved from FLEX 11.6 to FLEX 11.11 as the basis for all licensedapplications.Updates to Existing IP• PCI EXPRESS® Gen3/Gen2°Updated GT wrappers°Added Root Port support• Added support for Zynq 7030 and 7045 devicesVISE Design Suite 14 Release Noteswww.xilinx.com6UG631 (v14.5) March 20, 2013Important Information• 10G Ethernet MAC°Kintex-7 production•XAUI°Kintex-7 production°Requires patch to GTH and GTP IP. Refer to Xilinx® Answer Record:http://www.xilinx.com/support/answers/47684.htm.•RXAUI°Kintex-7 production• Tri-Mode Ethernet MAC°Kintex-7 production• 1000BASE-X/SGMII°Updated GTP and GTH transceiver files•QSGMII°New GTP transceiver updates•SPI-4.2°Virtex-7 production• PCI32 and PCI64°Kintex-7 production• For a detailed list of Xilinx IP Cores,...