Crack Software DownloadPiping Systems FluidFlow v3.21.2
Straight pipes, pipe bends, orifice and venturi metersSelect the pipe line on which the experiment will be performed by turning of the isolationvalves for all other horizontal pipe runs.Be sure that water manometers are connected to the pressure tappings read zero.Check that isolating valve on the selected pipe run is fully open.Turn off the flow control valve.Operate the control valve to give successively higher flow rates (9 times) and notemanometer readings for each case.With the same flow rates, repeat the experiment once more to avoid wrong or insufficientdata.B. Pipe fittingsApply steps 1 through 4 of the procedure (A) and then continue with the following ones.With the valves fully open, operate the control valve to give successively higher flow rates,noting the...