Tags :tutorial Page 37

Surface Line Facility A Surface Line facility has been added to WELLFLO. The Surface Line facility will allow the users to add a Surface Line of up to 1 mile at the Wellhead.  This Surface Line facility allows for elevation, diameter and roughness changes.  However, it only supports a user specified fluid temperature profile for the Surface Line regardless of whether temperature calculations are done for the well.  The Surface Line facility can be added to the Wellhead Facilities under the following conditions: 1. The Well Direction is set to Production. 2. The Parametric option is NOT enabled. 3. The case does NOT have a Surface Line already added.  Only one Surface Line is allowed to be added per case.  The Surface Line facility has three tabs, a Profile, a Dimensions and a Stream Tab.          On the Profile tab, the user can specify the label for the Surface Line, the Elevation Profile (in terms of Distance and Elevation), and the Fluid Temperature at each elevation point.   On the Dimensions tab, the user can enter Diameter and Roughness information, including any changes along the length of the elevation profile.   Page 4of 6WELLFLO 8.3 Release Notes          On the Stream tab, the user can specify the pressure at the downstream end of the Surface Line, as long as the pressure is not already specified at the wellhead or bottomhole.   This new feature offers users the flexibility to create much more accurate models of their wells; including the interaction of the well with near wellhead surface piping. WELLFLO – Drillbench Data Sharing WELLFLO now was the capability to share well geometry information with Drillbench using the “Import From Drillbench” and “Export to Drillbench” functions found in the File Menu.  Page 5of 6WELLFLO 8.3 Release Notes The geometry information that is currently shared includes: 1) Drilling Profile information including: a. Vertical profile b. 2D profile c. 2D (KOP) profile d. 2D (TVD vs MD) profile e. 3D (XYZ) profile f. 3D (Min Curvature) profile. 2) Production Casing geometry. 3) External Casing geometry. 4) Tubing geometry.  When the user chooses to export data from WELLFLO to Drillbench, the standard “Save” dialog will appear.  The user can then select to either save the WELLFLO geometry information to an existing Drillbench (DML) file, or store it to a new file.  If saving to an existing DML file, only the drilling profile and tubular geometry information will be overwritten.  After the user has selected the DML file to export to, WELLFLO will export the geometry information, and then provide a status message. Similarly, when the user chooses to Import data from Drillbench into WELLFLO, the standard Open File Dialog will appear.  The user can Select the Drillbench file to import from, and WELLFLO will load the Drilling Profile and well geometry data.  If WELLFLO detects an overlap or disconnect between drill string sections or casing sections that is not supported by the software, the user will see an error message. It is expected that this import/export process will allow a much more streamlined workflow for clients who are using both WELLFLO and Drillbench for the simulation of their steady‐state and dynamic drilling operations.  Future releases of WELLFLO will include extensions of this feature to include other types of data used in the flow modelling of drilling operations. FlexLM‐based Licensing OptionProduct:neotec wellflo v8.30 Lanaguage:english Platform:WIN32&WIN64 Size:1CD

What\’s New in Zemax 13 LightningTrace™ Design lighting systems in a fraction of the time with real-time modeling of illumination systems. LightningTrace, a patent-pending technology, is a new paradigm in light system design, at 20-500x faster than conventional luminaire prototyping tools and ray tracing. Built specifically for light fixture design, it works with the Visual Optimizer to let you see illumination patterns change in real time as the system is modified! CAD Manager Reads native part and assembly files directly in the Zemax 13 IE environment, eliminating export, import and file translation errors. The ability to dynamically modify files from Creo® Parametric® (Pro/E) is new in Zemax 13 IE, adding to the existing, highly-successful links with SolidWorks and Autodesk® Inventor®...

Lumerical’s 2013b Release a Milestone in Modeling Sophisticated Photonic Components and CircuitsLumerical’s 2013b release contains targeted feature development to better address a wide array of sophisticated passive, nonlinear and active photonic components on their own and assembled within highly functional and complex photonic integrated circuits May 23, 2013 – Vancouver, BC – Lumerical Solutions, Inc., a global provider of photonic design software, announced today its 2013b release which provides significant improvements to all of Lumerical’s products, and includes releases of FDTD Solutions 8.6, MODE Solutions 6.5, INTERCONNECT 3.0 and DEVICE 3.0. This 2013b release will reinforce Lumerical’s status as the most frequently referenced vendor of dedicated photonic design tools by R&D professionals. Release Highlights: Passive and Active Photonic Component Design...

Lumerical’s 2013b Release a Milestone in Modeling Sophisticated Photonic Components and CircuitsLumerical’s 2013b release contains targeted feature development to better address a wide array of sophisticated passive, nonlinear and active photonic components on their own and assembled within highly functional and complex photonic integrated circuits May 23, 2013 – Vancouver, BC – Lumerical Solutions, Inc., a global provider of photonic design software, announced today its 2013b release which provides significant improvements to all of Lumerical’s products, and includes releases of FDTD Solutions 8.6, MODE Solutions 6.5, INTERCONNECT 3.0 and DEVICE 3.0. This 2013b release will reinforce Lumerical’s status as the most frequently referenced vendor of dedicated photonic design tools by R&D professionals. Release Highlights: Passive and Active Photonic Component Design...

Visual MODFLOW® Flex is the industry standard software for 3D groundwater flow, heat and contaminant transport modeling.Integrated Conceptual and Numerical Groundwater ModelingPowerful 2D and 3D Visualization CapabilitiesIntuitive and Easy-to-UseA Complete Groundwater Modeling SystemWith Visual MODFLOW Flex you have a complete set of tools necessary for addressing water quality, groundwater supply, and source water protection initiatives, including:MODFLOW-2000, 2005, NWT – The world standard for groundwater flow modelingMODGLOW-LGR – Shared-node local grid refinement (LGR) for regional-local scale simulationsSEAWAT v.4 – 3D variable density groundwater flow coupled with multi-species solute and heat transportMT3DMS – The standard package for multi-species contaminant transport simulationsMODPATH – The standard package for forward and reverse particle trackingZone Budget – A package for sub-regional water budget calculationsPHT3D – A...

Calibre RealTimeOn-Demand Calibre signoff verification Calibre RealTimeCalibre® RealTime enables on-demand Calibre signoff design rule checking (DRC) for custom and analog/mixed-signal design flows, improving both design speed and the quality of results by providing immediate feedback on design rule violations and recommended rule compliance. Providing the same automated check capabilities available to digital design checking, Calibre RealTime makes it easier for custom IC designers to produce high-quality, high-performance designs at all nodes within today\’s tight production schedules. The award-winning Calibre RealTime platform completely transforms the custom/analog layout-verification-simulation loop by bringing Calibre signoff verification into the design creation process.product:Mentor Graphics Calibre v2012.4 Lanaguage:english Platform:WIN32&WIN64 Size:1CD

FloTHERM XT is an industry unique thermal simulation solution designed to be used during all stages of the electronics design process – from conceptual design to manufacturing, improving product quality, reliability and time-to-market. By bringing the EDA and the MCAD design flows closer, FloTHERM XT enables engineers to use the same design data throughout the design flow assuring the latest and most consistent data is always at the center of the design process. Leveraging the electronic cooling DNA from FloTHERM and CFD technology from FloEFD, FloTHERM XT possesses the power and performance for large, complex electronic systems and provides unprecedented capabilities to both thermal experts and mechanical engineers. In comparison to traditional general-purpose simulation products, FloTHERM XT cuts process times...

Description: Updating the HyperCrash 11.0 Win from the HyperWorks 11.0 WinSystem requirements: Pre Altair HyperWorks 11.0 WindowsProduct:HyperWorks 11.0.430 HyperCrash Win Update Lanaguage:english Platform:WIN32&WIN64 Size:1CD

Intergraph CADWorx Plant Design Suite is an integrated, complete AutoCAD®-based software series for plant design that provides intelligent drawing and database connectivity, advanced levels of automation, and easy-to-use drafting tools. The comprehensive series of design tools includes structural steel, equipment, process and instrument diagrams, and design review, plus automatic isometrics and bills of material. CADWorx is quick and easy to set up and use, so you can start designing right away. The bi-directional links between CADWorx and analysis programs for pipes and vessels enable designers and engineers to easily share information while keeping the drawings, models, and related information continuously synchronized as changes are made. And, the fast processing and highly refined user-interface features in CADWorx empower users to work...

elivering lean and efficient working practices, CAE Studio 3 has been the industry leading resource and reserve modeling system for over 20 years. Whether in consultancy, exploration, resource evaluation, planning or production, Studio 3 possesses multi-parametric modeling capabilities, and the versioning, audit trails and repeatability demanded by JORC, SAMREC, NI 43-101 and Guide 7 reporting codes. Ability to handle complex data sets including drillhole samples, channel samples, face maps, laser and image processed 3D modelsSuperior geostatistical capabilities including dynamic anisotropy and orebody unfolding to deal with post mineralization orebody distortion and conditional simulation tools to quantify riskWireframing and modeling tools that help define the structural geology quickly and accuratelyGeotechnical modeling that provides a detailed understanding of ground stability and rock...